How To Install Overhead Camera
How To: Make clean Wiring For Dash Cam on Toyota 4Runner – Introducing the Dongar Technologies Dashcam Adapter
The Dongar Technologies Dashcam Adapter for the 5th Gen 4Runner is finally here and ready to make clean upwards the nest of wires a lot of us accept under the kicking panel.
This adapter is able to power up your dashcam by intercepting the power that goes to the rearview mirror. The kit includes the dongle and a short micro USB cable (only if you order it through their website). The installation process for this product is quick and piece of cake to do!
If you are looking to run a dash camera in your 4Runner with ultra-clean and low-contour wiring, this is the solution for you. Until at present, you lot had to run wires for a dash photographic camera forth the headliner, down the a-pillar, behind the kick console and into your center console. You can see a previous dash camera install here. Though the process works, it can be quite a task. Not but does this procedure take longer, but you too have to deal with power slots being permanently taken up.
Observe It Online
- Dongar Technologies Adapter: Check price
For the virtually straightforward and streamlined installation of a dash camera in your 4Runner, follow along!
Tools & Materials
You volition demand the post-obit tools and materials for this install:
- Plastic Pry Tool
- Small Flat Head
- Pair of scissors
- Velcro
- Optional: USB adapter
There is not much to this installation to get your dash cam up and running. If you take 20 spare minutes and some basic store tools, y'all can become this wrapped up on your lunch break.
Step i. Remove & Disconnect Prune
First, start past removing the connector that is fastened to the rearview mirror.
Notation: Be conscientious in removing the connector, if you accidentally pull whatever wires out of the connector you'll be in for a bad time. I recommend you use a combination of a pocket screwdriver and a plastic pry tool. I had a plastic pry tool from an iPhone repair kit I had laying around.
Next, remove any mounts and any existing camera that may get in the way of installing the adaptor.
Step 2. Installation
Later on removing the connector from the rearview, begin to install the dashcam adaptor. The connector can only get in 1 style so in that location is no run a risk of messing up the orientation of the adaptor.
Next, attach the camera and mount information technology back onto the windshield.
If you ordered the adaptor from their website, they should have included a curt micro USB cablevision. In my situation, I needed to purchase an adaptor to go from micro USB to mini USB. Once the camera, adaptor, and cable have all been attached, brand sure that the photographic camera is being powered on when the key is turned to ignition.
Now that you made sure that the camera is operational, you can secure the USB adaptor to the mirror by attaching a piece of Velcro. I had to accept my Velcro off because of the extreme temperatures we experience here in Vegas.
Final Thoughts
This is a straight forrard installation with little to no hiccups that took me about 20 minutes to practise.
I'd recommend this if you want an easy manner to get power to your dashcam and want to minimize the rat'south nest of wires a lot of us end up acquiring over many projects.
The build quality is good for what it is built to do, but I practise wish they made it more robust by adding a plastic housing around the USB port. I've had this installed for two weeks at present and so far I am happy with the product and would still recommend.
I wish I constitute a improve solution to securing the backlog wiring coming from the fix up because information technology does hang a lilliputian chip. If you are anything similar me, it's little things similar this that bother me!
Overall information technology does its chore and I recall it is better than dragging a long USB all the mode to the armrest.
Source: https://trail4runner.com/2020/10/26/dongar-technologies-dashcam-adapter-4runner-5th-gen/
Posted by: bermangreirrom.blogspot.com
0 Response to "How To Install Overhead Camera"
Post a Comment